Elwing logo
Elwing logo

All articles

Powerkit 2 userguide copy copyUpdated 3 months ago



Welcome to the Elwing team !

You can feel the wind of freedom, just a few pages away...

Be patient, read on !

WARNING

ALWAYS WEAR A HELMET WHEN RIDING.

Never ride on wet surfaces, in the rain, on slippery or damaged surfaces, steep slopes, heavy traffic, railway tracks, gravel, rocks or any other obstacle that could lead to a loss of grip. Avoid driving at night without powerful front and rear lights.

DO NOT USE AN ELWING BOARD ON SLOPES

or at speeds where you would not be safe controlling a non-motorised skateboard. In the event of interference or battery failure, you may have to rely on your skateboarding techniques such as foot braking or powerslide to stop.

AVOID WATER.

Riding in wet conditions or through puddles can damage the electronics on the motherboard and lead to a loss of power or sudden board stoppage. Do not ride in wet conditions or through puddles. Damage to the motherboard caused by exposure to water is not covered by the warranty.

IMPORTANT !

Keep fingers, hair and clothing away from motors, wheels and all moving parts.

RISK OF ELECTRIC SHOCK.

Please do not open the battery box without consulting our support team, otherwise the warranty may be invalidated.

DO NOT OPEN THE ELECTRONIC

COMPARTMENTS without the help of our technical team, otherwise you will lose your warranty.

YOUR BOARD CAN LOSE BRAKING AND ACCELERATION AT ANY TIME.

Braking when the battery is full can cause the board to over-tension and come to a sudden stop. Radio interference, unintentional use of the throttle, and other factors can cause loss of power and braking. Take care to always be able to control your speed without electric assistance

BRAKING DOWNHILL CAN CAUSE THE BOARD TO STOP.

To avoid power surges, the remote control will warn you by vibrating and then the braking will stop. Stop safely before this happens and ride on flat surfaces or uphill to discharge the battery before coming back down.

THE ACCELERATOR IN 2nd, 3rd AND 4th MODE IS EXTREMELY SENSITIVE

to make the board responsive and perform well, but it can easily knock you off your feet. Make sure you're comfortable with the 1st mode first, then use the other modes carefully.

HIGH SPEED AND SLOPES CAN BE VERY DANGEROUS. 

Be extremely careful when pushing the limits of the board, even if you are an experienced rider. Accidents can cause serious injury or death.

CARS AND OTHER VEHICLES CAN KILL YOU.

Be extremely careful when driving in the presence of other vehicles. Drive carefully and bear in mind that other vehicles may not see you. Be aware of and obey the laws in your country that govern the use of your board on public roads, cycle paths, pavements or other places where you can ride.

ELWING DISCLAIMS ANY RESPONSIBILITY

FOR ANY EVENTS which may be related to misuse, abuse, neglect, accident or conduct in water by the user. Prolonged exposure to sunlight may discolour or weaken plastic casings, as they are not UV rated.

START

« Skateboarding is the fountain of youth.» Gaël Lapierre

Powerkit components

Boards


Remote control


Assembly

Assemble the battery


Assemble the lights


Calibrate the motor


Synchronise the remote control and the board


Remote control settings


After pairing the remote control and the skateboard, the remote control displays a "REMOTE" settings page. It is necessary to adjust these parameters for optimum use. 

Here are the buttons for navigating the remote control interface :

Once these settings have been made, you can return to the main screen by clicking Back (MODE button).You can always return to these settings by PRESSING the MODE button 3 TIMES in the REMOTE category.

Prepare

Basics of use

Goofy» or «regular» ?


Correct position


RIDE

Switch on/off

Remote control


Board


Use the remote control

Display


Control


MODE button


IMPORTANT !

Your skateboard must be stationary for this feature to work, and it is deactivated when the skateboard is in motion.

Modes


The STANDARD remote control and the SPORT remote control have 3 configurations, You can choose your configuration in the "RIDE MODE" menu by pressing the MODE button on the remote control quickly 3 times.

The difference between the STANDARD and SPORT remote controls lies in the NORMAL mode, with a setting range of up to 25 km/h for the STANDARD and up to 45 km/h for the SPORT (see Table 3: "NORMAL"). The LEGIT and RANGE modes are similar on both remote controls.

The ride modes and speed modes appear on the remote control display as follows :

Remote control settings


These settings are initially configured in the remote control. If you want to

! change them, follow these steps.

Press the MODE button 6 times to access certain "FACTORY MODE" settings.

Press the POWER button once to view the settings.


Applicable legislation


RECHARGE

Recharge batteries

Recharge the remote control battery


Recharge the skateboard battery


ATTENTION !

Never leave the board unattended while it is being loaded.

MAINTENANCE

Skateboard components


Remove the drive wheels



Remove the PU tire


Install the PU tire


Remove the controller box


Remove the wheels


Certificates


To know more ?


All the information in this guide can be found on our support page.

Don't hesitate to consult this page to find out more :

https://support.elwing.co/en-US


Don't hesitate to send us your comments by e-mail to

[email protected]

We'll use them to improve our products even further.

Elwing tech SAS

87 quai des queyries

33100 Bordeaux

TVA#FR69819757980

Was this article helpful?
Yes
No